PNEUMATIC DUAL WATER PUMPING SYSTEM

By | May 29, 2018

ABSTRACT:

The point of the undertaking is pneumatic worked water pumping framework. Outspread plunger Pneumatic Water pumping framework are responding pump in which the cylinder is accommodated the pumping activity. The cylinder is responded with the assistance of a pneumatic barrel and solenoid valve. There are two chambers are utilized as a part of this undertaking, one for a pneumatic barrel and another for a water-driven barrel. The yield amount of the water is differed by the planning control unit.

PRESENTATION:

A pump is a Mechanical gadget which changes over mechanical vitality into pressure driven vitality. This pump is grouped into two sorts;

i. Positive Displacement and

ii. Non-Positive Displacement pump

In positive removal, a pump is the one, in which the fluid is exchanged decidedly starting with one phase then onto the next stage by the forward and backward movement of the plunger or cylinder of the pump. In non-positive uprooting pump, the fluid is exchanged by the diffusive power. This power is a cause because of the rotational development of an impeller. In this, our venture, pneumatic water pump is of a positive dislodging pump. The remarkable highlights of a pneumatic water pump have been held in our venture model and this has been accomplished with extraordinary care.

Because of high exactness work associated with creating pneumatic water pump other than higher cost these pumps are not generally made by the vast majority of the ventures. The very name itself demonstrates that it works with the assistance of a cylinder. This cylinder is responded with the assistance of a solenoid valve and electronic planning control unit.

WORKING PRINCIPLE:

At first beginning with air packs, its capacity is to pack air from a low channel weight (normally climatic) to a higher weight level. This is an achieved by lessening the volume of the air.

Air compressors are by and large positive dislodging units and are both of the responding cylinder compose or the rotating screw or turning vane writes. The air compressor utilized here is a commonly little estimated, two-arrange compressor unit. It additionally comprises a packed air tank, electric rotor and pulley drive, weight controls and instruments for brisk attach and utilize. The compressor is driven by a 10HP engine and intended to work in 145 – 175 PSI run. On the off chance that the weight surpasses the composed weight of the recipient a discharge esteem gave discharges the overabundances air and in this manner remains a leader of any risks to occur.

The putaway air from the compressor is gone through an air fitter where the compacted air is separated from the fine clean particles. Notwithstanding, before the suction of air into compressor a channel procedure happen, yet not adequate to work in the circuit here the channel is utilized. At that point having a weight controller where the coveted weight to the worker is set. Here a variable weight controller is embraced.

Through an assortment of bearing control, esteem is accessible, a hand worked Valve with manual worked. The course control valve utilized here is 5 ports, 3 positions. There are two fumes ports, two outlet ports, and one channel port. In two outrageous positions, just the headings can be changed while the Centro mineral is a nonpartisan position and no physical changes are acquired. The 2 outlet ports are associated with an actuator (Cylinder). The pneumatic initiates is a twofold acting, single bar chamber. The barrel yield is coupled to additionally reason. The cylinder end has an air horning impact to counteract sudden push at outrageous closures.

APPLICATIONS:

Since the Pneumatic water Pump is more productive it is utilized for pumping the water or oil for the most part.

Household Applications

Mechanical Applications

ADVANTAGES:

1. This is of minimal in measure

2. Less Maintenance is sufficient

3. The oil or water pumped is of higher weight

4. Quite running and smooth task is accomplished.

5. Higher productivity

6. Full productive positive dislodging pump

7. Effective working standard

8. It does not have any Prime mover, similar to electric engine identified with the unit.

9. As the air is openly accessible, we can use the air to pumping the water and subsequently it is sparing.

10. Less Maintenance

DISADVANTAGES:

 It is costlier than alternate sorts of draw as a result of compressor unit.

 Less effectiveness when compacted to other gadget.

 Leakage of air influences the working of the unit.

DOWNLOAD: PNEUMATIC DUAL WATER PUMPING SYSTEM – single

Leave a Reply

Your email address will not be published. Required fields are marked *